Filter Products

Categories Expand

SuperPro Front Adjustable Antiroll Bar Toyota MR2 MK2

20mm Front adjustable antiroll bar
SuperPro 20MM , 3 Way Adjustable Front Antiroll Bar Toyota MR2 mk2
20mm Roll Bar, 23% increase in torsion rigidity from standard, 3 Way Adjustable
Hard – add 1mm resulting in 46% increase in torsion rigidity from standard.
Soft – subtract 1mm resulting in 10% increase in torsion rigidity from standard.

Designed to sharpen up handling and reduce body roll - especially when used on the track - is a set of heavy duty SuperPro anti-roll bars and mounting bracket bushes for the MR2 MKII Toyota’s mid-engined, compact sports car.

The upgraded ARBs for the Mk2 are three-position adjustable and 20mm diameter for both front and rear

Sway Bars are Cold Formed - made from XK5160RP Spring Steel. This is a medium to high carbon-chromium spring steel possessing high hardness used predominantly in manufacture of coil & leaf springs. Cold forming of these sway bars does not alter the mechanical properties of the material, so therefore no heat treating process is required. In addition, the steel used in this method is best suited to be cold bent and the mechanical properties are the same as the hot formed bars after heat treatment. When stamping and forming the ends of our cold bent bars SuperPro keep our forging temperatures as low as possible to avoid altering the mechanical properties of the steel. This process is made much easier by using an induction heater.

SuperPro Sway Bars go through 3 step coating process that we have been informed from external sources rivals Detroit O.E standard. With over 4000 hours of Salt spray testing and no degrading of the surface finish.

Suitable For: mk2